Saturday, April 25, 2015

Front Drum Inspection and Removal (part 2)

PROGRESS AT LAST


You may recall for part 1 that I was having trouble getting the pulley off.

A friend was over today and asked what state the roller was in.

He got out his tools and scratched in the hole to clean up so he could get is allen key in.   The allen screw came out easy.



Next he drove 3 1/4 inch bolts into the 3 holes in face of 177 which pushed it out of the pulley.

It was not quite that clean as one of the bolts twisted off.  But it is sticking out the other side and may come out with a vice grip.


No comments:

Post a Comment